The same guides as in the program, where F1 opens them. Every command: where to find it, what to prepare, the steps, the parameters and what to do when something goes wrong.
The blast design commands: blocks of holes, rows, charging and the delay network. Each command has its own section; press F1 over a ribbon button, or the ? in the title bar of a co…
23 commandsThe checks, calculations and paperwork for blast blocks: the blast calculation, the delay network, drilling and vibration checks, explosive energy, the block-model commands, the pa…
9 commandsMoves blast hole data in and out of the project: the hole table and the drill plan go out to the rig, the surveyor and the detonator logger; drilling, dip, charging, survey and MWD…
1 commandWorks out the zones that flying rock can reach round a blast block, shows them over the model while you try values, builds them as polylines on request and opens a printable sheet …
The block model commands: build a block model from a file, from scattered samples or over your drawing; estimate it from drillholes; colour, cut, edit and check it; report tonnes a…
2 commandsThe project's rock table and its geological bodies. Rocks are the names, colours and physical properties that logs, block models and blast holes refer to. Bodies are closed wirefra…
Tools for drawing and editing polylines and splines: lines at a grade, outlines of closed areas, offsets, joining, closing, smoothing, vertex editing, and putting lines on an eleva…
14 commandsCommands for the shape gallery, survey-style points, and converting or breaking shapes: points along a line, points by bearing, joining points into a line, breaking curves, hatch e…
12 commandsThe commands that change objects that already exist: move, copy, rotate, scale and mirror them, cut and extend lines, stretch a part of a drawing, join two lines with a smooth curv…
6 commandsSelecting, copying, pasting and deleting objects: select everything, select by layer and type, and the clipboard commands.
13 commandsCommands for the texts, dimensions and leaders already in the drawing: change their wording, alignment and precision, chain dimensions, add or remove leader lines, and mark a line …
8 commandsNamed text, dimension and leader styles, and annotation scales. New objects follow the current style; existing objects keep following the style they have, so changing a style resty…
18 commandsThe layer commands on the Home tab: pick the current layer, switch layers on and off, freeze and lock them, move objects between layers, and save a layer set-up as a named state. M…
Brings drawings and point lists into the project and writes the project out as an AutoCAD DXF file. All three commands are in the Exchange group of the File tab.
7 commandsCreates, opens and saves projects and templates. A project is a *.crosscut file; a template is a *.crosscutt file that new projects can start from. The commands are in the Project …
1 commandPrepares a printable sheet of the current 3D view. The sheet is a report made from a template and opened in FastReport Designer.
Measure distances, paths, areas, radii, angles and slopes by clicking points in the view, read the coordinates of a point, and list everything the program knows about one object. R…
1 commandCounts the objects of the project and adds up their length, area and volume, grouped by layer, kind and colour. The bill can be saved as a CSV file or printed as a sheet.
1 commandLooks the project over for duplicated objects, broken objects, dangling references and empty layers, lists what it finds, and repairs what can be repaired.
1 commandRemoves the layers, text styles, dimension styles, leader styles and line types that nothing in the project uses.
1 commandCompares the open project with another project file and shows what was added, removed or changed.
1 commandSearches the texts of the project, shows every match in a table, selects the objects that hold them and replaces the matches in one step.
2 commandsRebuild objects as another shape from their vertices, either by choosing sources by hand or by sets of rules applied to the whole project or the selection.
1 commandMoves, rotates and scales the selected objects or the whole project by numbers, or fits them to the right place from pairs of control points.
1 commandA small calculator that stays open beside the model. It works out expressions with lengths (metres) and angles, keeps a history and remembers the last result.
2 commandsTwo windows for the shortcuts of commands: the keys you press and the short names you type on the command line.
1 commandThe settings window of the program: interface language and theme, camera, the 3D scene, start-up, the graphics card and point-cloud limits, and clearing of the data the program kee…
