The whole blast in one project: from the hole grid and the plan for the rig to charging, delays, safe distances and the blast plan.
Draw the blast block, place the hole grid and give the holes their rock from the model or from MWD.
Send the plan to the rig and load the as-drilled holes back; the program shows how far each hole is from the design.
Charging rules pick the charge for each hole; measured holes and the explosives store are taken into account.
Connect the holes, check the delay network and watch the blast sequence.
Flyrock zones and the vibration at protected objects are drawn on the model.
Print the blast plan, the hole and charging sheets and the blast log; after the blast compare the muckpile with the survey.
The demo is the full program: all six modules, nothing switched off. Windows 10 or 11, 64-bit.
